neere
SPDRM
KOMVOS SDM Console
ANSA pre-processor
EPILYSIS solver
FATIQ analysis
META post-processor
ANSERS dashboard
RETOMO
ADD-ONs
DEEN
CAD Translators
ASERIS-BE
Tosca-ANSA Environment
ExtensionsAffiliations
The American Institute of Aeronautics and Astronautics (AIAA) is a professional society for the field of aerospace engineering. Its purpose is to ignite and celebrate aerospace ingenuity and collaboration, and its importance to our way of life. With nearly 30,000 individual members from 91 countries, and 95 corporate members, AIAA is the world’s largest technical society dedicated to the global aerospace profession.
BETA CAE Systems, a major engineering Aerospace Industry, is proud to be a Corporate Member to AIAA.
BETA CAE Systems became a member of the Association for Standardisation of Automation and Measuring Systems (ASAM). The aim of the association is to promote the international standardization of automation and measuring systems. For this purpose ASAM has developed a range of standards for different aspects of the life cycle of measuring data, ranging from the communication of measuring data recording systems to interfaces for data evaluation. The ASAM/ODS standard also provides a generic data model, interfaces, syntax and formats for selective accessing, exchanging, and storing measuring data.
The American Society of Biomechanics (ASB) was founded in 1977 to encourage and foster the exchange of information and ideas among biomechanists working in different disciplines and to facilitate the development of biomechanics as a basic and applied science.
ASB has a membership of approximately 850 academic researchers, clinicians, scientists, students, and industry members working to solve basic and applied problems in the realm of biomechanics and to improve understanding of the workings of biological systems.
BETA CAE Systems USA Inc. is a proud Executive Partner to ASB to support its initiatives and the field of Biomechanics.
BETA CAE Systems is proud to support ASSESS Initiative. The NAFEMS ASSESS Initiative is a broad reaching multi-industry initiative with a primary goal to facilitate this revolution of enablement that will vastly increase the availability and utility of Engineering Simulation, leading to significantly increased business benefits across the full spectrum of industries, applications and users. The ASSESS Initiative brings together key players from industry, government, academia and the software providers to guide and influence the software strategies for performing model-based analysis, simulation, and systems engineering. To achieve this vision the ASSESS Initiative will collaborate with multiple activities and organizations across the complete spectrum of Engineering Simulation.
BETA CAE Systems is proud to be a member of the CFD General Notation System (CGNS) steering committee.
The CFD General Notation System (CGNS) provides a general, portable, and extensible standard for the storage and retrieval of computational fluid dynamics (CFD) analysis data. It consists of a collection of conventions, and free and open software implementing those conventions. It is self-descriptive, machine-independent, well-documented, and administered by an international steering committee.
BETA CAE Systems , acknowledging the necessity for broad co-operations and alliances for the realization of PLM, supports the "Code of PLM Openness (CPO)" initiative and is aligned to its principles. We believe that openness and standardization in data exchange are key components for the evolution and deployment of efficient PLM practices.
Read: Code of PLM Openness Positioning
Code of PLM Openness statement
BETA CAE Systems is a Corporate Member of the European Society of Biomechanics (ESB). The European Society of Biomechanics was founded in 1976 at a meeting in Brussels of 20 scientists from 11 countries. It is now the largest Biomechanics society in Europe with over 750 members. Our goal is to encourage research, disseminate knowledge and promote progress in Biomechanics.
BETA CAE Systems is proud to join the community to contribute to the increase of simulation deployment in the domain of Biomechanics.
esbiomech.org
The Functional Mock-up Interface (FMI) is a free standard that defines a container and an interface to exchange dynamic simulation models using a combination of XML files, binaries and C code. It is supported by more than 170 software and is maintained as a Modelica Association Project. BETA CAE Systems software systems support FMI standard, and these are included in the respective public tools list.
BETA CAE Systems is a proud Associated Partner to Horizon Europe MSCA doctoral network GECKO (Design for IsoGeometric Analysis (IGA) discretization workflows).
GECKO is an international consortium of high-profile universities, research institutions and companies located in Europe. The mission of GECKO is to train 10 doctoral candidates (DCs) aiming at bridging the existing gap between the CAD and the computational models (CAE) and integrating them within the industrial workflow.
PC-DPMX (IPC-2581) Consortium is a group of PCB design and supply chain companies whose collective goal is to enable, facilitate and drive the use of IPC-DPMX in the industry. It is devoted to accelerating the adoption of IPC-DPMX as an open, neutrally maintained global standard to encourage innovation, improve efficiency and reduce costs.
BETA CAE Systems, believes in openness in interfacing engineering software. Aligned to this belief, BETA develops and maintains an interface in ANSA pre-processor according to the latest IPC-2581 specification. Moreover, BETA commits to collaborating with all consortia members to ensure that ANSA produced IPC-2581 data flow properly among their products.
BETA CAE Systems is a member of JT Open program community
run by Siemens PLM Software. JT Open is an influential
community of users, software vendors, and interested parties
spanning the PLM value chain who, through an open distribution
of the JT technology under a level playing field business model, are able to exchange 3D data for the purposes of visualization,
collaboration and data sharing.
jtopen.com
MeDiTATe (the Medical Digital Twin for Aneurysm Prevention and Treatment), a project funded from the European Union’s Horizon 2020 research and innovation programme, will deliver a comprehensive framework of simulation and imaging technologies, targeted at industrial and clinical-translation to accelerate the process of personalised cardiovascular medical procedure, validated through an integrated experimental programme to ultimately improve patient care.
The core idea of MeDiTATe is therefore to develop a Digital Twin and to make it available as “a service” for all in academia, hospital and industry.
BETA is a proud supporting partner to the MeDiTATe project.
BETA CAE Systems is a member of NAFEMS.
NAFEMS is a vendor neutral, not-for-profit membership association
of more than 800 companies from all over the world. The
scope of activities spans the original finite element methods,
through CFD to Optimization. As new application areas and
techniques constantly evolve, NAFEMS becomes involved to create
awareness and deliver appropriate education and training.
nafems.org
BETA CAE Systems is a member of ProSTEP iViP Association.
The ProSTEP iViP Association is an international association that has committed itself to developing innovative approaches to solving problems and modern standards for product data management and virtual product creation.
prostep.org
Revolution in Simulation is a web-based platform and resource center that educates, advocates, collaborates and innovates for the democratization of Simulation.
Democratized Simulation makes analysis more powerful and capable for CAE experts while accessible, safe and reliable for non-experts. The Rev-Sim.Org web site has the largest and latest collection of industry news, articles, presentations, white papers, videos, webinars, success stories and other materials related to the Democratization of Simulation. Web site visitors also have access to finding industry experts, training organizations, consultants, solution providers who can help them to leverage this revolution and maximize the ROI of simulation investments.
SAFER Vehicle and Traffic Safety Centre at Chalmers is a competence centre where about 35 partners from the Swedish automotive industry, academia and authorities cooperate to make a centre of excellence within the field of vehicle and traffic safety.
Research at SAFER spans a broad base, covering several disciplines and encompassing both safe mobility and vehicle safety in real environments. The centre’s activities engage the very elite in the field of safe transport solutions, and the results contribute to increasing the competitive advantages of the centre’s partner companies and organisations.
Chalmers University of Technology hosts the centre. By using the multidisciplinary scientific competence available within the centre, we make it a hub for excellent research and innovation.
BETA CAE Nordic AB is an Industrial Partner to the "Squeak & Rattle Competence Arena".
The purpose with the competence arena is to develop methods, tools and processes for virtual and physical verification of squeak & rattle in order to enhance industry and academia within the area.
The competence arena constitute of several members with diverse background that all have connection to prediction of squeak & rattle. The main idea is to share competence, knowledge, resources and equipment between members for jointly defined projects.
Volvo Car Group and Chalmers University of Technology are the initiators of the Squeak & Rattle Competence Arena.
BETA CAE Systems is a registered User for accessing the Toyota Motor Corporation Total Human Model for Safety (THUMS) models, and makes available extended functionality for the pre- and post-processing of simulation analysis scenarios with THUMS.
Toyota Motor Corporation makes Total Human Model for Safety (THUMS) software freely available as part of its efforts toward a safe mobility society. THUMS is a virtual human body model software program for computer analysis of human body injuries caused in vehicle collisions. Free access to THUMS, and subsequent use by a wider variety of users, is expected to enhance vehicle safety.
VMAP is an open and vendor-neutral standard for CAE data storage, to enhance interoperability in virtual engineering workflows. The initial ITEA VMAP project highlighted some typical engineering cases from different material and manufacturing domains.
In the year 2022, stakeholders from the industry, agreeing that standards and methods need to be supported continually, took the initiative and established the "Material Data Exchange Interface Standard Community" (VMAP-SC). VMAP-SC aims to provide standards and best-practice guidelines, and to ensure that standardisation efforts continue into the future.
BETA CAE Systems is an active member to the VMAP-SC not-for-profit association.
Read more:
Mapping Made Easy : How the New VMAP Interface Standard can be Utilized Towards Smooth Preprocessing
Breaking down the interoperability barrier among different FEA software
